Clemex ST Mini 1.3 CCD BW Camera Installation Guide (Win 7)

The attached document covers the installation of the Clemex ST Mini 1.3 CCD BW Cameras.

This is the text only version:

Note: The Clemex software must be installed before installing the camera.
1. Please ensure that you have a High Speed USB 2.0 port on you PC.
2. Right-click on your Desktop to access the Screen Resolution Window and
check that your screen resolution is set at a minimum of 1920 x 1080.
3. Plug the Clemex ST Mini 1.3 CCD BW camera in any available USB 2.0 port.
CAUTION
If you connect your camera to a non USB 2.0 USB port
your camera may not work.
Clemex ST Mini 1.3 CCD BW Camera
USB 2.0 high speed camera installation sheet
4. The computer installs the appropriate device driver software and tells you when it is finished.
5. To synchronise the camera with the Clemex software, open the Video Input Setup program
which is found in the Clemex Image Analysis folder on your desktop.

6. Click Auto-Install Camera. The camera details appear. Click to close the window.
7. Run your Clemex Software by double-clicking
on the icon in the Clemex Software folder on
your desktop.
CLEMEX 1.888.651.6573
[e-mail] I clemex.com
Clemex Software
Clemex ST Mini 1.3 CCD BW Camera